Parts list for The Universal 1Watter - 10 Meter Version V3 04 Jan 2016 =========================================================== Items is Bag #1 C6,7,8,9,10,11,12,13,14,19,27,33,36,37,38,41,44,46,47,48,53 ...SMT capacitors and alternate 100nF mono green caps L4 FT37-43:10T - 9" #27 green T5 BN-43-2402-8T:2T - 10" #34 red & 4" #30 red =========================================================== Items in Bag #2 C1,2,3,4,34 - 120p *** C5 40pF Yellow Trimmer *** C15 47p *** C16 56p *** C17,39 47n yellow axial C18 1p0 - may be labeled 1D ****** C20,25 43p *** C21,22 220p *** C23,24,26 50p *** C28 3p *** C29,30,31,32 - 680p *** C35 68p *** C40,52 10u C42,49 47u C43 33u C45 33p C50 empty C51 empty Cs not included Cx not included D1,2 1N5711 blue (two pieces taped together) D3 1N5256B silver 30 V Zener D4,6,7 1N4148 red D5 MV209 varactor TO-92 case D8 1N5817 D9,10 NPC-127 blue 5.6 V Zener L1,2 T37-10 with 10 turns, 9" #26 red wire *** L3 T37-2 with 24 turns, 16" #30 red wire *** L5 T37-2 with 25 turns, 17" #30 red wire *** L6 T37-2 with 18 turns, 13" #26 red wire *** Q1 2N5109 Q2 PN2222 Q3,6,7 2N3904 Q4 MPSH10 Q5 J310 Q8,9 J113 Q10 2N3906 Q11 2N7000 R1,2 51 R3,9,21,22,25 - 470 (R25 only used with no speed pot) R4 2K2 (2.2K) R5 500 ohm trim Pot (in hardware Bag #3) R6,7,8,17,18,19 - 4K7 (4.7K) R10 1K R11 1K5 (1.5K) R12 1K2 (1.2K) R13,15 1M R14 4R7 (4.7) R16 10K R20 500 ohm volume control (in hardware Bag #3) R23,24 4M7 (4.7M) Rx not included T1 FT37-61 with 10 turns primary - 9" #26 red wire *** and 2 turns secondary - 4" #27 green wire T2 T37-10 with 15 turns primary - 12" #26 red wire *** and 1 turn secondary - 4" #27 tinned wire T3 T37-10 with 1 turn primary - 4" #27 tinned wire *** and 15 turns secondary - 12" #26 red wire T4 T37-10 with 3 turns primary - 6" #27 green wire *** and 21 turns secondary - 15" #30 red wire U1 78L10 U2,4,5 NE602A U6 LM386N-4 U3,7 78L08 U8 78L05 U9 ATtiny45-20PU Keyer IC v.0 X1 20.000 mHz Mouser.com P/N 559-FOX200-20-LF *** X2,3,4,5,6 - 8.064 mHz - custom production order *** ========================================================== Items in Bag #3 One Heat Sink for TO-5 5 each - 8 Pin Dip Machine Sockets 2 each - stereo phone jacks for headphones and keyer connections 1 each - normally open push-button 1 each - 500 ohm Volume Control - R20 1 each - 500 ohm trim pot - R6 1 each - BNC Connector ========================================================== Items in Bag #4 PCB Printed Circuit Board from www.expresspcb.com 64" #26 red solderable magnet wire (13t) 27" #27 green solderable magnet wire (6t) 52" #30 red solderable magnet wire (11t) 10" #34 red solderable magnet wire (2t) ========================================================= 1 each - Power Switch *NOT INCLUDED* 1 each - 10K or 20K or 50K or 100K Linear Single Turn Tune Potentiometer *NOT INCLUDED* 1 each - 10K or 20K or 50K or 100K Linear Keying Speed Potentiometer *NOT INCLUDED* Universal Interconnect Kit #2 *NOT INCLUDED* Connector Wire *NOT INCLUDED* Case *NOT INCLUDED* -See recommendations in the building instructions 4-40 PCB mounting screws and spacers *NOT INCLUDED* Instruction on How to Solder *NOT INCLUDED* ========================================================= *** = BAND SPECIFIC COMPONENT ===================== End of List =======================